Fuel Level Sensor JT606D
FUEL LEVEL SENSOR JT606D ( can be cut off on spot, resolution <1mm)<>
Your best choice for remote fuel level monitoring.
Adoption of measurement principle of high precision capacitance and application of power processing technology of industrial auto electronices,
JT606D series fuel sensor sovled problem of measuring fuel level change precisely in severe environment. which can not only be cut at spot, but
also replace the original I fuel detection unit, Especially with adoption of patented installation technology, which enable simple, reliable and convenient assembly.
1. Can cut off
Fuel sensor could be cut off according to fuel tank size on site, Avoid tolerances caused by wrong size
Recognition accuracy is less than 1mm, The sensor can identify the level fluctuation of less than 1mm.
3. Simple installation
Patented design simple mounting flanges, Install the sensor does not need another dozen screw holes
Press button for full and empty calibration on site
4. Wide input voltage, high and circuit protection
4-70V wide input voltage range, make sure that the sensor is not under the influence of the input voltage.
Multi circuit protection, reverse connection protection, short circuit protection.
5. Multi-signal output
Voltage output (10-5V), current output (4-20mA), resistance output (0-500Ω)
Digital signal output: RS232,RS485, Meet the remote monitoring and control while driving the car gauge
|Baud Rate||2400,4800,9600,57600,115200 or Customizable|
|Output Signal||0~5V(Voltage) , 4~20mA(Current), 10~500Ω(E,i;ated resostove)|
|Measure Extremely Long Range||10CM~~150CM|
|Housing Material||Industrial Aluminum|
|Weight||400G （50CM Length）|
|Dimension||Length X 60mm x 60mm|
|Weight||400g (50cm Length)|